If you’re looking for tips to boost your wireless Wi-Fi signal, you’ve come to the right place. There are several ways to extend your Wi-Fi signal, which we are going to discuss here. We have 10 Tips to Effectively Boost Your Wireless Router Signal.
Check the Internet Speed of Your Plan
One of the reasons why your internet speeds are low could be because you are using the wrong plan. Check with your ISP and find out the speed of your internet plan. Then, run a speed test on DoSpeedTest.com which is the best internet broadband speed checking tool there. If you find that the numbers on DoSpeedTest.com and those claimed by your ISP match, then the issue is that you’ve got a slower internet speed. Your wifi signal should improve as soon as you switch over to a faster internet speed. If there is a mismatch between what is advertised by your ISP and what the tests on DoSpeedTest.com reveal, then read the rest of the tips to boost your wireless router listed here.
Change Broadcast Channel on Router
All wifi routers operate on certain specific broadcast channels. Typically, a Wi-Fi router chooses the least crowded option among the channels that are available. You should use a free tool called inSSIDer to identify which channel you are on and them to switch to a less crowded channel. 1, 6 and 11 are the least crowded channels in the 2.4GHz band in the US.
Update Adapter Firmware
The network adapters are one of the important factors that determine the wireless range and performance. The firmware on network adapters on PCs and laptops need to be constantly upgraded. It’s likely that your laptop has a built-in network adapter. Visit the Network Settings in the Control Panel and find the name of the network adapter. Now, go to the website of its manufacturer and download the latest firmware related to it.
Update the Router Firmware
The next step is to upgrade the router firmware. It’s quite easy to do this. Just visit the website of your router’s manufacturer and search for the latest firmware and upload it using the router’s interface. Also, pay attention to the release notes that come with the firmware. Often, they will have valuable instructions on solving the relevant wifi connectivity issues.
Setup Second Router as an Access Point or as a Repeater
One great option you can use is to set up another router as a repeater or as a wireless access point. This picks up the signal from the original router and repeats it – which makes it so much stronger. To do this, connect the second router’s LAN port to the LAN port of the primary router. Change the netmask of the second router so that it is the same as that of the primary router. Also, both networking devices should have the same SSID and security settings for this arrangement to work.
Change the Router Position
The wireless router should not be in close proximity to the modem or with other electronic gadgets. It should be in a central location and the signals should not be obstructed or hampered in any way. When the wireless signals have to come through a wall or a window, their power gets reduced by a half, at least. The wifi router should be in the same room where you use your laptop or desktop.
Use a Antenna Booster
The latest wifi routers come with internal antennas – in which case you don’t have to worry about them. However, many Wi-Fi routers still come with external antennas – these need to be upgraded. You may want to use a Hi-Gain antenna such as the HAI15SC Hi-Gain Wireless Corner Antenna from Hawking Technology for best results. Hi-gain antennas or booster antennas have been found to boost your wifi signals considerably and they cost from $40 to $100.
Setup a Wireless Range Extender
Use extenders, also known as a Wi-Fi expander or a wireless repeater, used to extend the wifi signal and help to boost your signal. Range extender looks similar, but work differently. The extender should be close enough to your main network router to pick up a solid signal range, but close enough to the weak spot so it can do its job of, well, expanding that signal range. It’s not compulsory for extender that is the same model or brand as your existing router, but you should pick one capable of broadcasting your signal range. Suppose, don't buy an 802.11n extender if your router is on 802.11ac. Use repeaters. A repeater repeats an existing wifi network. This involves using the encryption and the SSID. An extender repeats the existing wifi network, but uses a different SSID and requires a separate login. Extenders are today more common than repeaters. Both repeaters and extenders are hard to set up – which is something that goes against them.
Buy a New Router
If none of the tips to boost WiFi signal listed above work, then you may want to use a new router. The best routers today are dual-band 802.11n devices. They deliver a throughput up to and exceeding 1Gbps.
Generally, most of the modern routers come with Quality-of-Service (QoS) tools to limit the amount of bandwidth that apps use. This is handy if you use Voice over IP (VoIP) and do lot of video streaming. The last thing you want is to have your call quality and video quality degrade just because someone is downloading a large video file from Dropbox. You can, suppose, specify which applications and services get priority, and set downloaders as lower priority at certain times of the day. Surely, it will take long time to get that file, but everyone else on the network will thank you. Usually, QoS settings found under advanced settings in the network's administrator interface. Some routers may even make it easier by offering a gaming or multimedia setting, so you know those applications will be prioritized.
This information has been brought to you by DoSpeedTest.com, which is the top internet broadband speed checking tool you can use to find out just how strong your wireless signals are.